ZyXEL Communications ES3500-24 User Manual page 68

Chapter 6 Tutorials
Go to Basic Setting > Switch Setup and set the VLAN type to 802.1Q. Click Apply to save the
2
settings to the run-time memory.
Click Advanced Application > VLAN > Static VLAN.
3
In the Static VLAN screen, select ACTIVE, enter a descriptive name (VLAN 200 for example) in
4
the Name field and enter 200 in the VLAN Group ID field.
Select Fixed to configure ports 1, 2, 3 and 10 to be permanent members of this VLAN.
5
Clear the TX Tagging check box to set the Switch to remove VLAN tags before sending frames out
6
of these ports.
68
ES3500 Series User's Guide