ZyXEL Communications ES3500-24 User Manual page 146

Chapter 15 Broadcast Storm Control
Table 42 Advanced Application > Broadcast Storm Control (continued)
LABEL
*
Broadcast (pkt/
s)
Multicast (pkt/s)
DLF (pkt/s)
Apply
Cancel
146
DESCRIPTION
Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this row
first to set the common settings and then make adjustments on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you make them.
Select this option and specify how many broadcast packets the port receives per second.
Select this option and specify how many multicast packets the port receives per second.
Select this option and specify how many destination lookup failure (DLF) packets the port
receives per second.
Click Apply to save your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel
to save your changes to the non-volatile memory when you are done configuring.
Click Cancel to begin configuring this screen afresh.
ES3500 Series User's Guide