ZyXEL Communications ES3500-24 User Manual page 297

Table 127 SNMP System Traps (continued)
OPTION OBJECT LABEL
errdisable errdisableDetectTrap
errdisableRecoveryTrap
Table 128 SNMP Interface Traps
OPTION OBJECT LABEL
linkup linkUp
LinkDownEventClear
linkdown linkDown
LinkDownEventOn
lldp LLDPRemoteTopologyChange
ES3500 Series User's Guide
OBJECT ID
ES3500-24:
1.3.6.1.4.1.890.1.5.8.61.130.4.1
ES3500-8PD:
1.3.6.1.4.1.890.1.5.8.72.130.4.1
ES3500-24HP:
1.3.6.1.4.1.890.1.5.8.73.130.4.1
ES3500-24:
1.3.6.1.4.1.890.1.5.8.61.130.4.2
ES3500-8PD:
1.3.6.1.4.1.890.1.5.8.72.130.4.2
ES3500-24HP:
1.3.6.1.4.1.890.1.5.8.73.130.4.2
OBJECT ID
1.3.6.1.6.3.1.1.5.4
ES3500-24:
1.3.6.1.4.1.890.1.5.8.61.27.2.2
ES3500-8PD:
1.3.6.1.4.1.890.1.5.8.72.27.2.2
ES3500-24HP:
1.3.6.1.4.1.890.1.5.8.73.27.2.2
1.3.6.1.6.3.1.1.5.3
ES3500-24:
1.3.6.1.4.1.890.1.5.8.61.27.2.1
ES3500-8PD:
1.3.6.1.4.1.890.1.5.8.72.27.2.1
ES3500-24HP:
1.3.6.1.4.1.890.1.5.8.73.27.2.1
1.0.8802.1.1.2.0.0.1
Chapter 39 Access Control
DESCRIPTION
This trap is sent when an error is
detected on a port, such as a loop
occurs or the rate limit for specific
control packets is exceeded.
This trap is sent when the Switch
ceases the action taken on a port, such
as shutting down the port or discarding
packets on the port, after the specified
recovery interval.
DESCRIPTION
This trap is sent when the Ethernet
link is up.
This trap is sent when the Ethernet
link is up.
This trap is sent when the Ethernet
link is down.
This trap is sent when the Ethernet
link is down.
This trap is sent when the LLDP (Link
Layer Discovery Protocol) remote
topology changes.
297