ZyXEL Communications ES3500-24 User Manual page 41

Table 8 Navigation Panel Links (continued)
LINK
PoE
Advanced Application
VLAN
Static MAC
Forwarding
Static Multicast
Forwarding
Filtering
Spanning Tree
Protocol
Bandwidth
Control
Broadcast Storm
Control
Mirroring
Link Aggregation This link takes you to screen where you can logically aggregate physical links to
Port
Authentication
Port Security
Classifier
Policy Rule
Queuing Method
VLAN Stacking
Multicast
AAA
IP Source Guard
Loop Guard
VLAN Mapping
Layer 2 Protocol
Tunneling
ES3500 Series User's Guide
DESCRIPTION
This link takes you to a screen where you can configure the Switch to supply
power over Ethernet.
This link takes you to screens where you can configure port-based or 802.1Q
VLAN (depending on what you configured in the Switch Setup menu). You can
also configure a protocol based VLAN or a subnet based VLAN in these screens.
This link takes you to screens where you can configure static MAC addresses for a
port. These static MAC addresses do not age out.
This link takes you to a screen where you can configure static multicast MAC
addresses for port(s). These static multicast MAC addresses do not age out.
This link takes you to a screen to set up filtering rules.
This link takes you to screens where you can configure the RSTP/MRSTP/MSTP to
prevent network loops.
This link takes you to screens where you can cap the maximum bandwidth
allowed on a port.
This link takes you to a screen to set up broadcast filters.
This link takes you to screens where you can copy traffic from one port or ports to
another port in order that you can examine the traffic from the first port without
interference.
form one logical, higher-bandwidth link.
This link takes you to a screen where you can configure IEEE 802.1x port
authentication as well as MAC authentication for clients communicating via the
Switch.
This link takes you to a screen where you can activate MAC address learning and
set the maximum number of MAC addresses to learn on a port.
This link takes you to a screen where you can configure the Switch to group
packets based on the specified criteria.
This link takes you to a screen where you can configure the Switch to perform
special treatment on the grouped packets.
This link takes you to a screen where you can configure queuing with associated
queue weights for each port.
This link takes you to screens where you can activate and configure VLAN
stacking.
This link takes you to screen where you can configure various multicast features,
IGMP snooping and create multicast VLANs.
This link takes you to a screen where you can configure authentication,
authorization and accounting services via external servers. The external servers
can be either RADIUS (Remote Authentication Dial-In User Service) or TACACS+
(Terminal Access Controller Access-Control System Plus).
This link takes you to screens where you can configure filtering of unauthorized
DHCP and ARP packets in your network.
This link takes you to a screen where you can configure protection against
network loops that occur on the edge of your network.
This link takes you to screens where you can configure VLAN mapping settings on
the Switch.
This link takes you to a screen where you can configure L2PT (Layer 2 Protocol
Tunneling) settings on the Switch.
Chapter 4 The Web Configurator
41