ZyXEL Communications ES3500-24 User Manual page 162

Chapter 18 Port Authentication
Use this screen to enable and assign a guest VLAN to a port. In the Port Authentication >
802.1x screen click Guest Vlan to display the configuration screen as shown.
Figure 84 Advanced Application > Port Authentication > 802.1x > Guest VLAN
The following table describes the labels in this screen.
Table 50 Advanced Application > Port Authentication > 802.1x > Guest VLAN
LABEL
Port
*
Active
Guest Vlan
162
DESCRIPTION
This field displays a port number.
Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this row
first to set the common settings and then make adjustments on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you make them.
Select this checkbox to enable the guest VLAN feature on this port.
Clients that fail authentication are placed in the guest VLAN and can receive limited
services.
A guest VLAN is a pre-configured VLAN on the Switch that allows non-authenticated users
to access limited network resources through the Switch. You must also enable IEEE 802.1x
authentication on the Switch and the associated ports. Enter the number that identifies the
guest VLAN.
Make sure this is a VLAN recognized in your network.
ES3500 Series User's Guide