Capturing Snapshots - Cisco TelePresence System Codec C90: Profile 65” Administrator's Manual

Software version tc7.0
Table of Contents

Advertisement

Cisco TelePresence System Codec C90 and Profile 65" Dual using C90
Contents

Capturing snapshots

The snapshot feature, which is disabled by default, allows
snapshots captured by your video system to be displayed
on the Call Control page. Captures from your video system's
camera as well as from its presentation channel will be
displayed.
This feature might come in handy when administering the
video system from a remote location, e.g. to check the
camera view.
To use web snapshots you have to sign in with ADMIN
credentials.
Enabling the snapshot feature
The snapshot feature is disabled by default. The feature must
be enabled using the remote control and on screen menu, or
the Touch
controller.
The Touch controller must be directly
connected to the codec's second Ethernet port.
Touch controller:
Open the
Settings
menu on the Touch controller and tap
*
Administrator. You have to log in with an administrator
user name and password to get access to the
Administrator
menu.
Tap
Web Snapshots
and choose ON.
Remote control and on screen menu:
Go to the Advanced configuration menu, navigate to
Video > AllowWebSnapshots
and choose On.
Far end snapshots while in a call
While in a call, snapshots of the remote participant's main
camera and presentation channel (far end) will be captured
and displayed as shown in the illustration. The snapshots are
updated approximately every 30 seconds.
Far end snapshots are captured even if web
snapshots are disallowed on the far end video
system. Web snapshots are prohibited only for
encrypted calls.
* The
Settings
menu can be accessed from the drop down window
that appears when you tap the contact information in the upper, left
corner of the Touch controller.
D14635.13 Profile C90 and Codec C90 Administrator Guide TC7.0, DECEMBER 2013.
Introduction
Web interface
Web interface
Navigate to: Call Control
System settings
Take live snapshots
While the
Live snapshots
box is checked,
snapshots are captured by your video
system (main source and presentation
source) approximately every two seconds.
Snapshots from your video system
20
Setting passwords
Click the snapshot in order
www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
Administrator Guide
Appendices
Far end snapshots
to see a larger image.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Telepresence codec c90Profile 65” dual

Table of Contents