Capturing Snapshots - Cisco TelePresence System Codec C40 Administrator's Manual

Cisco TelePresence System Codec C40/C60 and Profiles using C40/60
Contents

Capturing snapshots

The snapshot feature, which is disabled by default, allows
snapshots captured by your video system to be displayed
on the Call Control page. Captures from your video system's
camera as well as from its presentation channel will be
displayed.
This feature might come in handy when administering the
video system from a remote location, e.g. to check the
camera view.
To use web snapshots you have to sign in with ADMIN
credentials.
Enabling the snapshot feature
The snapshot feature is disabled by default. The feature must
be enabled using the remote control and on screen menu, or
the Touch controller. The Touch controller must be directly
connected to the codec's second Ethernet port.
Touch controller:
• Open the Settings menu on the Touch controller and tap
*
Administrator. You have to log in with an administrator
user name and password to get access to the
Administrator menu.
• Tap Web Snapshots and choose ON.
Remote control and on screen menu:
• Go to the Advanced configuration menu, navigate to
Video > AllowWebSnapshots and choose On.
Far end snapshots while in a call
While in a call, snapshots of the remote participant's main
camera and presentation channel (far end) will be captured
and displayed as shown in the illustration. The snapshots are
updated approximately every 30 seconds.
Far end snapshots are captured even if web
snapshots are disallowed on the far end video
system. Web snapshots are prohibited only for
encrypted calls.
* The Settings menu can be accessed from the drop down window
that appears when you tap the contact information in the upper, left
corner of the Touch controller.
D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013.
Introduction Web interface Web interface
Navigate to: Call Control
System settings
Take live snapshots
While the Live snapshots box is checked,
snapshots are captured by your video
system (main source and presentation
source) approximately every two seconds.
Snapshots from your video system
24
Setting passwords
Click the snapshot in order
www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
Administrator Guide
Appendices
Far end snapshots
to see a larger image.