Changing The System Password - Cisco TelePresence System Codec C90: Profile 65” Administrator's Manual

Cisco TelePresence System Codec C90 and Profile 65" Dual using C90
Contents

Changing the system password

We strongly recommend that you set a password for
any user with ADMIN rights in order to restrict access
to system configuration. This includes the default
admin user.
A warning, saying that the system password is not set, is
shown on screen until you set a password.
You can read more about password protection in the
► Setting passwords
chapter.
D14635.13 Profile C90 and Codec C90 Administrator Guide TC7.0, DECEMBER 2013.
Introduction Web interface Web interface
1. Open the Change Password dialog
Hover the mouse over your user name, and
choose Change password
2. Set the new password
Enter your current and new passwords as
requested, and click
change to take effect.
If the password currently is not set, leave
the Current password
System settings
in the drop-down list.
Change password for the
field blank.
12
Setting passwords
www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
Administrator Guide
Appendices