Table of Contents
Advertisement
Cisco TelePresence System Codec C90 and Profile 65" Dual using C90
Contents
Troubleshooting
The troubleshooting page lists the status for some common
sources of errors. The list may be different for different
products and installations
*
.
Note that critical issues and errors are clearly marked in red
color; warnings are yellow.
*
The messages shown in the illustration serve as examples. Your
system may show other information.
D14635.13 Profile C90 and Codec C90 Administrator Guide TC7.0, DECEMBER 2013.
Introduction
Web interface
Web interface
Navigate to: Diagnostics > Troubleshooting
System settings
Run diagnostics
Click
Re-run diagnostics
the information in the list is up-to-date.
Leave standby mode
This button is only visible when the
system is in standby mode. If in
standby mode, click
to wake up the system.
45
www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
Administrator Guide
Setting passwords
Appendices
to make sure
Deactivate standby
Advertisement
Table of Contents
Need help?
Do you have a question about the TelePresence System Codec C90: Profile 65” and is the answer not in the manual?
Questions and answers