Solving Printer Problems; Unformatted Flash Detected - Lexmark CX410e User Manual

Troubleshooting

Unformatted flash detected [53]

Try one or more of the following:
•
From the printer control, select Continue to stop the defragmentation and continue printing. For non‑touch‑screen
printer models, press
•
Format the flash memory.
Note: If the error message remains, then the flash memory may be defective and need to be replaced.
Waste toner bottle nearly full [82.xy]
You may need to order a waste toner bottle. If necessary, select Continue on the printer control panel to clear the
message and continue printing. For non‑touch‑screen printer models, press
Weblink server not set up. Contact system administrator.
From the printer control panel, press
Note: If the message appears again, then contact your system support person.

Solving printer problems

•
"Basic printer problems" on page 272
•
"Option problems" on page 275
•
"Paper feed problems" on page 277
Basic printer problems
The printer is not responding
Action
Step 1
Make sure the printer is turned on.
Is the printer turned on?
Step 2
Check if the printer is in Sleep mode or Hibernate mode.
Is the printer in Sleep mode or Hibernate mode?
to confirm.
to clear the message.
to confirm.
Yes No
Go to step 2. Turn on the printer.
Press the Sleep button Go to step 3.
to wake the printer
from Sleep mode or
Hibernate mode.
272