Setting Up The Printer Software - Lexmark CX410e User Manual

Additional printer setup
Use the
5 EXT port
6 USB printer port
7 Ethernet port

Setting up the printer software

Installing the printer software
Notes:
• If you installed the printer software on the computer before but need to reinstall the software, then uninstall
the current software first.
•
Close all open software programs before installing the printer software.
1
Obtain a copy of the software installer package.
• From the Software and Documentation CD that came with your printer.
•
From our Web site:
Go to www.lexmark.com, and then navigate to:
SUPPORT & DOWNLOADS > select your printer > select your operating system > download your software
installer package
2
Do either of the following:
•
If you are using the Software and Documentation CD, then insert the CD and wait for the installation dialog to
appear.
If the installation dialog does not appear, then do the following:
In Windows 8
From the Search charm, type run, and then navigate to:
Apps list > Run > type D:\setup.exe > OK.
In Windows 7 or earlier
a
Click , or click Start and then click Run.
b
In the Start Search or Run dialog, type D:\setup.exe.
c
Press Enter, or click OK.
Note: D is the letter of your CD or DVD drive.
In Macintosh
Click the CD icon on the desktop.
To
Connect additional devices (telephone or answering machine) to the printer and the
telephone line. Use this port if you do not have a dedicated fax line for the printer and if this
connection method is supported in your country or region.
Note: Remove the plug to access the port.
Connect the printer to a computer using a USB cable.
Connect the printer to an Ethernet network.
36