Toshiba TOSVERT VF-S11 Instruction Manual page 206

No. Device
(9) DIN rail kit
Parameter writer Note 1) Use this unit for batch read, batch copy, and batch writing of setting parameters.
(10)
Extension panel Note 1) Extended operation panel kit provided with LED indication section, RUN/STOP key,
(11)
Internal RS485
(12) communication circuit
board
Internal DeviceNet
(13) communication circuit
board
Internal LONWORKS
(14) communication circuit
board
RS485 communication
(15)
converter unit Note 1)
RS232C communication
(16)
converter cable
Remote panel
(17)
Application control unit
(18)
Conduit pipe attachment
(19)
kit
Note 1: Dedicated cables are needed to connect inverters to a personal computer.
Cable models: CAB0011 (1m)
CAB0013 (3m)
CAB0015 (5m)
Available for 2.2kW or 1.5kW models and lower. (Model: DIN003Z, DIN005Z)
(Model: PWU001Z)
UP/DOWN key, Monitor key, and Enter key.
(Model: RKP001Z)
This unit allows you to connect a upper controller to multiple inverters for data transfer.
(Model: RS4003Z)
This unit allows you to connect a upper controller to multiple inverters for data transfer.
(Model : DEV001Z)
This unit allows you to connect a upper controller to multiple inverters for data transfer.
(Model : LIU005Z)
This unit allows you to connect a upper controller to multiple inverters for data transfer.
(Models: RS4001Z, RS4002Z)
This unit allows you to connect a personal computer to inverters for data communications.
(Model: RS20035)
This panel includes a frequency meter, a frequency regulator and RUN/STOP
(forward/reverse run)switches.
(Model: CBVR-7B1)
The AP series of control units is available for the inverter to allow it to perform various
kinds of applied control. Contact your Toshiba representative for further information.
Attachment kit used for conformance to NEMA TYPE1.
J-7
Function and purpose
E6581158
10