Toshiba TOSVERT VF-S11 Instruction Manual page 197

Industrial inverter for 3-phase induction motors
Hide thumbs Also See for TOSVERT VF-S11:
Table of Contents

Advertisement

[Example of wiring]
Note 1: Strip and earth the shielded cable, following the example shown in Fig.
9
9.1.3
The low-voltage directive provides for the safety of machines and systems. All Toshiba inverters are CE-marked
in accordance with the standard EN 50178 specified by the low-voltage directive, and can therefore be installed in
machines or systems and imported without problem to European countries.
Applicable standard: EN50178
Pollution level: 2 (5.2.15.2)
Overvoltage category: 3
EMC plate
(Note 1)
Grounding terminal screw
Power supply wiring
Braking resistor wiring (Shielded cables)
Shielded cable
About the low-voltage directive
Electronic equipment for use in power installations
Electronic equipment for use in power installations
240V class - 3.0mm (5.2.16.1)
500V class - 5.5mm (5.2.16.1)
Control wiring (Shielded cables)
Motor wiring (Shielded cables)
Strip the cable and fix it to the metal plate by means
of a metal saddle for electrical work or equivalent.
I-4
E6581158
VF-S11
FL relay wiring
To relay

Advertisement

Table of Contents
loading

Table of Contents