Partial Document Or Photo Copies - Lexmark X950 Series User Manual

Troubleshooting
When the text is light or disappearing:
• From the Copy screen, navigate to:
Content > Text >
•
From the Copy screen, navigate to:
Advanced Options > Advanced Imaging > Sharpness > increase the current setting
•
From the Copy screen, navigate to:
Advanced Options > Advanced Imaging > Background removal, and then reduce the current setting
•
From the Copy screen, navigate to:
Advanced Options > Advanced Imaging > Contrast > increase the current setting
•
From the Copy screen, navigate to:
Advanced Options > Advanced Imaging > Shadow detail > reduce the current setting
When the output appears washed out or overexposed:
•
On the Copy screen make sure the Content Type and Source settings are appropriate for the document being
scanned.
• From the Copy screen, adjust the Darkness setting.
•
From the Copy screen, navigate to:
Advanced Options > Advanced Imaging > Shadow detail > reduce the current setting
•
From the Copy screen, navigate to:
Advanced Options > Advanced Imaging > Background removal > reduce the current setting

Partial document or photo copies

These are possible solutions. Try one or more of the following:
C
HECK THE DOCUMENT PLACEMENT
Make sure the document or photo is loaded facedown on the scanner glass in the upper left corner.
C
HECK THE PAPER SIZE SETTING
Make sure the paper size setting matches the paper loaded in the tray:
1
From the printer control panel, check the Paper Size setting from the Paper menu.
2
Before sending the job to print, specify the correct size setting:
•
For Windows users, specify the size from Print Properties.
• For Macintosh users, specify the size from the Page Setup dialog.
> select the appropriate source for the original document being copied >
298