Table of Contents
Advertisement
Chapter 8 - Maintenance
Replacement of Honeywell Versatilis Signal
Scout
Firmware update
System logs
38
The modularized design of the Honeywell Versatilis Signal Scout
allows the user to disassemble the Signal Scout from the current
target structure and to mount on some other target structure with
ease, or to replace the currently fitted mounting adapter with some
other adapter to suit the change in mounting surface.
Perform the below instructions to replace the Honeywell Versatilis
Signal Scout:
1. Detach the Signal Scout from the target structure:
In case of screw-mount: Remove the M6 nut securing the
l
Signal Scout onto the target structure.
In case of magnetic mount: Remove the Signal Scout from the
l
target structure manually.
In case of adhesive mount: Cut through the adhesive layer
l
(sticking the adapter to the target structure) using a blade.
2. Firmly hold the base of the Signal Scout using a spanner (of size
41mm), and unscrew the adapter from the base of the Signal
Scout using another spanner (of size 32mm) till it's completely
disassembled.
3.
Install the Honeywell Versatilis Signal Scout with the required
mounting adapter. For information on mounting procedure for
Honeywell Versatilis Signal Scout with various adapter types, see
"Mounting Honeywell Versatilis Signal Scout " on page 20.
The Honeywell Versatilis Connect app has provision to update to the
latest firmware available for the Honeywell Versatilis Signal Scout.
For more information on how to update firmware, see the Honeywell
Versatilis Connect App User's Guide, 34-VT-25-03.
User has the provision to download the Signal Scout's log files and
save it to the local drive using Honeywell Versatilis Connect App.
For more information on how to download logs using Honeywell
Versatilis Connect app, see the Honeywell Versatilis Connect App
User's Guide, 34-VT-25-03.
Advertisement
Table of Contents
