About This Guide; Safety Notes - Chauvet Q-WASH 560Z-LED Quick Reference Manual

Q-Wash 560Z-LED QRG
About This
Guide
Disclaimer

Safety Notes

All manuals and user guides at all-guides.com
The Q-Wash 560Z-LED Quick Reference Guide (QRG) contains connection
and mounting information, as well as menu options and DMX values.
Refer to the User Manual for detailed information and instructions. You
can download the User Manual from the CHAUVET® website:
www.chauvetpro.com.
Read ALL the disclaimers and Safety Notes in this document, as well as
those in the product's User Manual before installing, operating, or
maintaining this product.
DO NOT open this product unless instructed. It contains no user
serviceable parts.
DO NOT look at the light source when this product is on.
DO NOT touch the product when it is operating because it may be hot.
DO NOT cover the ventilation slots when the product is operating to
avoid internal overheating.
DO NOT install or operate this product where there is less than 50 cm to
the nearest surface to allow adequate ventilation around it.
DO NOT leave any flammable material within 50 cm from this product
while operating or connected to the power outlet to minimize the risk of
fire.
DO NOT carry this product from the head. Use the handles instead.
DO NOT lift the unit by the housing. Use the handles instead.
DO NOT mount this product overhead without using a safety cable.
DO NOT operate this product outdoors or in any location where dust,
excessive heat, water, or humidity may affect it.
DO NOT operate this product if you see damage on the housing, lenses,
or cables. In any of these cases, have the damaged parts replaced by an
authorized technician immediately.
DO NOT connect this product to a dimmer or rheostat.
ONLY connect this product to a grounded and protected circuit.
Page 2 of 16