Safety Notes - Chauvet Followspot 1200 Quick Start Manual

Before you Begin
Safety
Please read the following notes carefully because they include important
safety information about the installation, usage and maintenance of this
Notes
product.
The Followspot 1200 has no user serviceable parts inside it. Any
reference to servicing this fixture you may find within this guide or the
downloaded user manual will only apply to properly CHAUVET®
certified technicians. Do not open the housing or attempt any repairs
unless you are one of them.
Please refer to all applicable local codes and regulations for proper
installation of the Followspot 1200.
Keep this guide and the user manual for future consultation. If you sell
the Followspot 1200 to another user, make sure that they also receive
these documents.
Personal
•
Safety
•
•
•
•
Mounting
•
and Rigging
•
•
Power and
•
Wiring
•
•
•
Operation
•
In the unlikely event that your Followspot 1200 may require service,
please contact CHAUVET® Technical Support.
2
All manuals and user guides at all-guides.com
The Followspot 1200 housing weighs 94 lbs (42.6 kg). Always ask for
help when mounting this fixture to avoid personal injuries or damage to
the unit.
Always connect the Followspot 1200 to a grounded circuit to avoid the
risk of electrocution.
Avoid direct eye exposure to the light source while the Followspot 1200
is on.
Always disconnect the Followspot 1200 from its power source before
servicing.
Do not touch the Followspot 1200's housing when operating because it
may reach up to 85º C.
This product is for indoor use only! To prevent risk of fire or shock, do
not expose this product to rain or moisture.
Make sure there are no flammable materials close to this product while
operating.
When hanging this fixture, always secure it to a fastening device using
a safety cable (not provided).
Always make sure that you are connecting the Followspot 1200 to the
proper voltage, as per the specifications in this manual or on the
product.
Never connect the Followspot 1200 to a dimmer pack.
Never disconnect the power to the fixture by pulling or tugging on the
power cable.
Make sure the power cord is not crimped or damaged.
In case of a serious operating problem, stop using this product
immediately!
Followspot 1200 Quick Start Guide Rev. 3