Table of Contents
Advertisement
S
ETUP
•
The
configure the master and slaves.
•
If you are not familiar with DMX standards or Master/Slave connectivity,
download the DMX Primer from the Chauvet website
www.chauvetprofessional.com
Mounting
Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes.
For our CHAUVET Professional line of mounting clamps, go to http://trusst.com/products/.
Orientation
Always mount this product in a safe position, making sure there is adequate room for ventilation,
configuration, and maintenance.
Rigging
Chauvet recommends using the following general guidelines when mounting this product.
•
Before deciding on a location for the product, make sure there is easy access to the product for
maintenance and programming purposes.
•
Make sure that the structure onto which you are mounting the product can support the product's
weight. See the
Technical Specifications
•
When mounting the product overhead, always use a safety cable. Mount the product securely to a
rigging point, whether an elevated platform or a truss.
•
When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity.
•
When power linking multiple products, mount the products close enough for power linking cables to
reach.
•
The bracket adjustment knobs allow for directional adjustment when aiming the product to the
desired angle. Only loosen or tighten the bracket knobs manually. Using tools could damage the
knobs.
Procedure
The Ovation P-56UV comes with a double-bracketed yoke to which you can either attach mounting clamps
for hanging or simply use as a floor stand. You must supply the mounting clamps. Make sure the clamps
are capable of supporting the weight of this product. Use at least one mounting point per product. For the
CHAUVET Professional line of mounting clamps, go to
Mounting Diagram
Ovation P-56UV User Manual Rev. 5
Operation
section of this manual provides detailed instructions on how to
for weight information.
Mounting clamp
(such as CTC-50 or CTC-50HCN
from Chauvet)
Safety cable
(such as CH-05 from
Chauvet)
Mounting bracket
Bracket
adjustment knob
for more information.
http://www.trusst.com/products.
Page 7 of 16
Advertisement
Table of Contents
