Figure 1-3 Hrg8 And Hrg16 Front Panel - Honeywell HRG4 User Manual

28 | Performance Series DVR User Guide
HRG8 and HRG16 Front Panel
Position Button/Indicator
1 USB Port
2 Status Indicators
POWER
READY
STATUS
ALARM
HDD
Tx/Rx
3 IR Receiver
4 Compound Buttons
1/MENU
2/ABC/F1
3/DEF/F2/SPOT
4/GHI/ESC
5/JKL/EDIT
6/MNO/PLAY
7/PQRS/REC
8/TUV/PTZ
9/WXYZ/PREV
www.honeywellvideo.com
Figure 1-3 HRG8 and HRG16 Front Panel
Function
Connection for a USB mouse or USB flash memory device.
Turns green when the HRG DVR is on.
Turns green when the device is running normally.
Illuminates when the compound key switches to numeric/letter input mode.
Turns red when there is a sensor alarm occurring.
Flickers red when the HDD is reading or writing.
Flickers green when the network connection is functioning normally.
Sensor for IR Remote Controller.
Enter number "1"; Access the main menu.
Enter number "2" or letters "A", "B", "C"; The F1 button when used in a list field will
select all items on the list. In PTZ Control mode, it will turn on/off PTZ light.
Enter number "3" or letters "D", "E", "F"; The F2 button is used to cycle through tab
pages. It will also bring up the Channel & OSD Position settings. SPOT - reserved at
this time.
Enter number "4" or letters "G", "H", "I"; Exit and back to the previous menu.
Enter number "5" or letters "J", "K", "L"; Delete characters before cursor; Select the
check box and ON/OFF switch; Start/stop record clipping in playback.
Enter number "6" or letters "M", "N", "O"; Playback, for direct access to playback
interface.
Enter number "7" or letters "P", "Q", "R", "S"; Manual record, for direct access to
manual record interface; manually enable/disable record.
Enter number "8" or letters "T", "U", "V"; Access to PTZ control interface.
Enter number "9" or letters "W", "X", "Y", "Z"; Multi-camera display in live view.