Hoop The Fabric - Viking Designer I User Manual

Hoop the fabric

1. Select Large Hoop 150x240 mm (6x9,6"), Stan-
dard Hoop 100x100 mm (4x4") or Mega Hoop
360x150 mm (14,4x6") depending on the size
of your de sign. Always use the size that is
shown on the embroidery screen menu.
2. Loosen the screw on the larger outer hoop.
Place the hoop on a fi rm fl at surface with the
screw on the lower right. There is a small
arrow in the center of the lower edge of the
hoop which will line up with a small arrow on
the inner hoop.
3. Place the stabilizer and the fabric on top of
the outer hoop and place the inner hoop on
top of the fabric with the small arrow at the
bottom edge.
4. Push fi rmly on the inner hoop to push it into
the outer hoop. Hint: Be sure to loosen the
hoop screw enough for the fabric and stabili-
zer thickness, so you can push the inner hoop
in place. Push in on the sides of the large
hoop.
5. Tighten the hoop screw. The fabric should be
very taut in the hoop for the best results.
66
Embroidery