Decorative/Crafting - Viking Designer I User Manual

Decorative / Crafting
Your Husqvarna Viking Designer I is unsurpas-
sed for creative options.
Stitch your way through the next pages to learn
the basics for a few of the favorite creative tech-
niques.
Appliqué
One of the most exciting and time saving fea-
tures on your Designer I is the automatic sa tin
stitch programs on Menu F, Applique Stitches.
The pre-programmed satin stitch: 2mm stitch
width F3, 4mm stitch width F4, 6mm stitch
width F5. The top ten sion is reduced automati-
cally for satin stitch.
Fabric: Quilting fabric, Husqvarna Viking Tear-
A-Way stabilizer, Cotton scrap for applique.
Thread: Embroidery thread on top and embroi-
dery weight bobbin thread.
Touch: Woven medium on the Sewing Advisor.
Touch: Menu F, Applique Stitches, Stitch F4.
Snap on: Presser foot B as recommended.
Sew:
• Cut a small square for the applique from the
cotton scrap.
• To baste applique square to the quilt fabric,
touch A11 to zigzag stitch or use fusible web.
• Place Tear-A-Way stabilizer under the quilt
fabric.
• Place the fabric under the presser foot.
• Satin stitch around the square with the out-
side swing of the needle sewing off the edge
of the applique.
84

Decorative/Crafting