Set Menu - Viking Designer I User Manual

Learn your Designer I

Set Menu

Touch to override automatic setting and
make manual adjustments. There are four dif-
fe rent set menus. Touch if you want to jump
between them. To close Set menu touch
When you have made changes in standard set-
tings for thread tension, presser foot pressure,
and balance, the frame around the setting will be
highlighted in red. The changed settings will af-
fect all stitches and the settings remains until the
Designer I is turned off.
Menu U
Touch to save a favorite stitch on the "My
Stitches" menu. Any personal settings from
or (including tension, presser foot
pressure, balance) will be saved together with
the stitch.
To delete a stitch from Menu U, touch . (For
more information see page 26).
Thread tension
Adjust top thread tension by touching or .
The numbers in the window above indicates the
tension setting. The higher the number the more
tension on the thread.
Presser foot pressure or Pivot position
Adjust presser foot pressure by touching or
. The number in the window above indicates
the pressure setting. The higher the number the
more pressure the foot puts on the fabric.
When settings changed on stitches in the V Menu
or when embroidering, the height of the pivot
po si tion is set instead of the presser foot pres-
sure.
Balance or
Adjust stitch balance by touching or . The
number in the window above indicates the ba-
lance setting.
When a buttonhole is selected, the balance but-
tons will adjust the density of the right column of
the buttonhole. See page 52, Buttonhole Balance.
29