Start Embroidering - Viking Designer I User Manual

Start embroidering

1. Touch to begin embroidering. The
presser foot is lowered automatically.
2. After a few stitches a Pop-up menu will
prompt you to cut the starting thread tail. Cut
the thread tail. Touch
dering.
3. Your Designer I will stop embroidering and a
Pop-up menu will prompt you when the top
thread color should be changed.
4. When your embroidery is complete, your De-
signer I will stop sewing, the top and bob bin
thread are cut automatically, and the presser
foot is raised to the extra lift position to make
it easy to slide off the hoop.
To move the hoop forward for
easy cutting
When changing from one thread to another, it is
best to cut the long "jump" stitches that are
created when the hoop is moving. This will
make the thread cutting easier when the
embroidery is fi nished.
1. Press . The hoop moves towards you.
2. Cut the threads.
3. Press again and the hoop moves back to
its ready po si tion.
4. Press to resume the embroidery.
Embroidery
to resume embroi-
75