Viking Designer I User Manual page 81

Embroidery
A new Pop-up menu appears.
The disk memory is indicated with .
Empty memories are indicated with green color,
in this case memory D1 is empty, .
Step memory numbers with .
If you wish to save design, touch , if not
touch .
Full memories are indicated with red color, in
this case memory D7 is full, .
Loading your saved designs from fl oppy disc
Turn on your Designer I or select Menu to re-
turn to Main menu.
Select .
Note: can only be selected when the Main
menu is displayed on the Color Touch Screen.
Select . A pop-up menu appears. "Load com-
bination" with two boxes to select from.
M allows you to select programmed built-in stit-
ches, and lettering, from one of the 15 memo-
ries that have been programmed from the stitch
menus in the machine, by stepping through the
memories.
D allows you to select from the memories on
the disk. These are embroideries and lettering
from disks that you have programmed in Built-In
Color Customizing and saved to a fl oppy disk.
There are 15 memories to select from.
Step through the memories with .
Empty memories are indicated with , and
full memories with .
Select the memory required, touch .
The saved combination will appear on the Color
Touch Screen. A box appears around the fi rst
design in the combination, indicating it can be
worked with. will select other designs in the
combination allowing for further adjustments.
Select to stitch out the saved combination.
81