Viking Designer I User Manual page 85

• To turn outside corners, touch needle stop
down or tap the needle down with the foot
control to pivot with the needle on the outsi-
de of the applique. The Sensor Foot Lift pi vot
po si tion makes it easy!
• Touch to secure the stitches.
Note: To adjust the satin stitch length or width, touch
. Use the and
stitch length or width.
Tip: Snap on the transparent presser foot B with
red lines for greater visibility.
Optional: The optional open toe applique foot
is completely open in front for greater visibility
and features a red guideline for satin stitching.
Decorative/Crafting
buttons to fi ne tune the
85