Built-In Disk Drive; Embroidery Booklet - Viking Designer I User Manual

Built-in Disk Drive

Insert: Slide the embroidery disk into the built-
in disk drive on the side of the machine.
Eject: Push the but ton on the side of the mach-
i ne to eject the disk.
Removing the Embroidery unit
1. To put the embroidery arm in the rest po si tion
to store it in the embroidery case, touch
(the needle up/down function button). The
embroidery arm will move to the rest po si tion.
Switch off the machine.
2. To release the unit, raise the large button at
the right front of the unit and slide the unit to
the left.
3. Close the cover on the socket.
Threading the machine
See page 8.

Embroidery booklet

Page through the Embroidery Booklet for Sam-
pler 100 designs and fonts. All embroidery de-
signs are pictured actual size. The center point
and placement markings on all sides are marked
for easy placement in the hoop.
The menu number (in black), design number (in
red), and stitch count (number of stitches in the
design) are next to each design.
The thread spools show the suggested thread
colors for each color number and give the th-
read color number for 40 weight Rayon embroi-
dery thread.
Embroidery
65