Using The Digital Epg; Setting Timer Programmes - Pioneer LX01 Operating Instructions Manual

Using the digital electronic programme guide
05

Using the Digital EPG

Using the Digital EPG you can check the schedule of
digital TV programmes, view information about desired
programmes, and/or select programmes.
1 GUIDE Press to display the Digital EPG screen.
The EPG screen updates automatically if the EPG data is
acquired successfully. If not, the Digital EPG screen
shows a blank image.
2 Select a TV programme.
D007
• Press / (LCD page 1) to skip to the next or
previous channel list page.
• Information about the selected programme appears
in the information window.
• To watch a programme currently on air, select the
programme (then press ENTER).
• You can check information about programmes
scheduled up to one week ahead, depending on
conditions.
• Depending on conditions, it may take some time to
acquire EPG data.
3 Press to view more information about the
INFO
selected programme.
Detailed information appears in the schedule window.
If the screen contains further information, More ... is
displayed.
Note
1 The general programme list does not show programmes that have already finished.
2 For more information on timer programmes, see About timer recordings on page 98.
86
En
1
• To quit the display of detailed information, press
INFO again (or RETURN).
D007
************
*************
**************************
4 GUIDE Press to exit the Digital EPG screen.

Setting timer programmes

Using the Digital EPG, it's easy to set digital TV
2
programmes for recording
1 Press to display the Digital EPG screen.
GUIDE
ENTER
2 Select a programme.
D007
• Select a programme currently on-air: press ENTER to
close the Digital EPG screen and watch the channel
immediately, or press RED to set the programme for
recording immediately.
• Select a programme not yet started then press
ENTER or RED to set the programme for recording.
13:40 - 14:05
More...
.