Pioneer LX01 Operating Instructions Manual page 153

The Initial Setup menu
Setting Options
Digital Tuner
Replace Channels Next Screen
If you execute a Replace Channels command, any timer recordings set for D.TV channels will be erased.
Add New Channels Next Screen
Channel Sort Next Screen
Channel Options Next Screen
Auto Skip Off •
Radio
Data
Radio & Data
Signal Check Next Screen
Aerial Power On
Auto
Off •
If the setting keeps reverting to Off when you try to set to On or Auto, the aerial may not be connected properly, or it may be shorted. In either
case, check the connection and try making the setting again.
D.TV Language Next Screen
Explanation
Scans for digital channels and replaces all the channel presets with the
results. Before the scan starts you will need to select your country.
After the scan is complete the recorder tells you whether any new channels
were found, and if so, how many.
(You can cancel the scan before it has finished by pressing HOME MENU or
RETURN. In this case, no channels are set.)
Automatically scans for new digital channels.
After the scan is complete the recorder tells you whether any new channels
were found, and if so, how many.
(You can cancel the scan before it has finished by pressing HOME MENU or
RETURN. In this case, no new channels are set.)
Use this screen to sort channel presets into your prefered order. Use the
/// buttons to highlight the channel you want to move, press
ENTER. Use the cursor buttons again to highlight the position you want to
move the channel preset to, then press ENTER again.
(If there are more channel presets than will fit on one screen, you can select
the next/previous page by highlighting the small triangular marks and
pressing ENTER.)
From this screen you can skip or lock channels. Locked channels will require
the correct password to be entered before the channel can be watched. Use
the /// buttons to highlight a preference box and press ENTER to
toggle the preference.
To enter this screen, input the parental lock password when prompted (if one
has not yet been set then the password you enter becomes the parental lock
password).
No channels are automatically skipped.
Radio channels are skipped when selecting channels.
Data channels are skipped when selecting channels.
Radio and data channels are skipped when selecting channels.
Use this screen to check the signal level and quality of digital channels. Use
the / buttons to change the RF channel; select Add New Channels
then press ENTER to scan for new channels; press HOME MENU to exit.
Power is supplied to the connected aerial (antenna) when this recorder is on
or in standby.
Power is supplied to the connected aerial (antenna) only when this recorder
is on.
This recorder does not supply power to the connected aerial (antenna).
From this screen you can set your Primary and Secondary Audio preference
for multilingual digital broadcasts, your Primary and Secondary Subtitle
preference for programmes that are broadcast with subtitles, and your
Teletext language preference. Use the / buttons to highlight a field then
use the / buttons to change it.
15
153
En