Pioneer LX01 Operating Instructions Manual page 73

Getting started
• If you cannot receive any of the Host Channels (see
the above table) then you won't be able to use the
GUIDE Plus+ system. In this case do not set the
postal code (or set Country to Other) in the GUIDE
Plus+ setup screen. (When GUIDE Plus+ service
starts in your area, set the postal code again.)
If digital broadcasts start in your area, please set the
EPG Type Select setting in the Initial Setup menu to
Digital EPG.
• Even if you can't use the EPG functions where you
live, you can still set VIDEO Plus+ recordings and
manual recordings — see Setting a manual recording
on page 81.
• The front panel display shows EPG when receiving
data. If you power on the recorder during an EPG
download, the download is cancelled.
• EPG data may be received several times a day. All
updates are automatic.
• When downloading EPG data, the recorder may
sound as though it is on. This is normal.
Checking the downloaded data the
following day
1 GUIDE Display the GUIDE Plus+ screen.
You should see a grid filled with channel logos and TV
listings information. Use the / buttons to review the
list. If you notice that there are channels missing, or that
there are channels in the list that you don't get, go to the
Editor screen:
• Press  repeatedly until the Menu bar is highlighted.
• Press  until Editor is highlighted. The main area of
the screen now shows a list of channels. Those that
are turned ON are displayed in the grid; those that
are OFF are hidden. Use the /// buttons to
move down the list and turn channels ON or OFF as
necessary.
• For any channel that you turn ON, the GUIDE Plus+
system will need to know how it is received (the
source) and on which programme number. The
source may be the built-in tuner of this recorder, or
an external receiver. The programme number is the
number on which the channel can be found on its
receiving device/source. The entry in the Editor
screen must match this number for correct recording
of that channel.
• The above is especially important for the 'Host
Channel'. Please make sure that the Host Channel is
always switched ON.
1 2 3
4 5 6
7 8 9
2 (LCD page 2) Change the programme
0
numbers as you like.
Changing the programme numbers allows you to decide
the order in which the channels change when stepping
through them sequentially. You can do this to group
certain channels together, for example.
Name
BBC1
BBC2
ITV
CH4
CH5
BBC3
ITV2
E4
UKGOL
3 When you're done, press the BLUE Action button
(Home) to get back to the GUIDE Plus+ home screen.
• You can find detailed information on using the GUIDE
Plus+ system in the following chapter.
On/Off Source Prog. No.
On D. TV 001
On D. TV 002
On D. TV 003
On D. TV 004
On D. TV 005
On Ext. Rec. 1 007
On D. TV 006
Off D. TV 014
On D. TV 017
03
73
En