Connecting Up; Receiver Subwoofer; Rear Panel; Side Panel - Pioneer LX01 Operating Instructions Manual

Connecting up

02
Chapter 2
Connecting up

Receiver subwoofer

HDMI
OUT IN 3 IN 2 IN 1
SYSTEM

Rear panel

HDMI
OUT IN 3
SYSTEM
1 2
Rear panel
1 HDMI OUT connector
Connect to a television that has an HDMI terminal.
2 HDMI IN connectors (x3)
Use high-quality audio/video connection with compatible
HDMI devices. Connect the included HDD/DVD recorder
to HDMI IN 1.
To select this input, choose HDMI 1 to HDMI 3.
3 SYSTEM connector
Connect to the display unit.

Side panel

• There is a cover over the connectors on the side
panel.
A. When making connections, lift the two hooks and
remove the cover.
B. Once connections are finished, line up the three
positions and place the cover back in its original
position.
8
En
Side panel
IN 2 IN 1
OUT 1 OUT 2
IN
CONTROL
3 4
B
A
ANTENNA
L
AM LOOP
1 IN 2
R
OPTICAL
FM
UNBAL 75 Ω
DIGITAL
ANALOG
AUDIO IN
5 6 7 8
4 CONTROL OUT jacks (x2)
Connect the supplied HDD/DVD recorder to the CONTROL
OUT 1 jack with the supplied control cable. You can
connect another component to the other Control Out jack.
5 DIGITAL OPTICAL IN jacks (x2)
To listen to optical digital audio, change the input to
Digital 1 or Digital 2.
When the digital output jacks of your TV are connected to
these jacks, set 'TV Input' (see page 40).
6 AM LOOP antenna terminal
7 FM antenna socket
8 ANALOG AUDIO IN jacks
Handle sound from an external component by using
stereo audio code. To listen to analog audio, change the
input to Analog.
When the analog output jacks of your TV are connected
to these jacks, set 'TV Input' (see page 40).
9 SPEAKERS terminals
Match the colours of the speaker cords to their respective
connectors.
10 AC IN – Power inlet
Important
• You must connect the supplied HDD/DVD recorder
with a control cable. If not, the HDD/DVD recorder
may not operate properly.
R R L L R L
FRONT CENTER FRONT SURROUND SUBWOOFER
SPEAKERS ( 8 Ω )
9
AC IN
10