Listening To The Sound Of An External Device On This Receiver; Connecting For Digital Audio; Connecting An Analog Audio Component; Listening To An External Audio Source - Pioneer LX03BD Operating Instructions Manual

Other connections
Listening to the sound of an
external device on this receiver
You can connect both analog and digital
external audio sources to this system.
• For a device with a video output, connect
directly to the TV using a separate video
cable, etc.
We recommend using an HDMI cable to
connect sources that have HDMI terminals.
For more information see Connecting using
HDMI on page 50.

Connecting for digital audio

This system has several digital inputs for digital
playback components, such as your HDD/DVD
recorder, digital satellite receiver or TV game.
To video input
HDD/DVD recorder, STB, etc.
From digital
output (coaxial)
ANALOG
L
R
AUDIO IN
COAX 3
OUT IN 2
DIGITAL IN HDMI
• Connect the digital output jack on HDD/
DVD recorder, etc. to one of the DIGITAL
input jacks on this unit.
Use a commercially available optical cable or
coaxial cable to make this connection.
TV
From digital
or
output (optical)
OPTICAL
1
AM
LOOP
FM
2
UNBAL
75
ANTENNA
DIGITAL IN
IN 1
• When digital connections are used, it may
be necessary to adjust the digital audio
output settings on the connected
component. For details, consult the
operating instructions for the component
involved.
Connecting an analog audio
component
You can use the ANALOG AUDIO IN jacks to
connect an analog audio component, such as
a VCR or tape player.
To video input
VCR, Tape player, etc.
AUDIO IN

Listening to an external audio source

To listen to audio from a connected external
component on this system, choose its input
function on the remote control. Some Pioneer
products can be controlled via this remote.
RECEIVER

1 If the system isn't already on, switch
it on.
Also make sure that the external source (TV,
HDD/DVD recorder, etc.) is switched on.
TV
From
analog output
ANALOG
L
R
COAX
3
OUT IN 2 IN 1
DIGITAL IN HDMI
09
47
En