The Video Adjust Menu; Setting The Picture Quality For Tv And External Input - Pioneer LX01 Operating Instructions Manual

The Video Adjust menu

Chapter 14
The Video Adjust menu
Using the Video Adjust menu you can set up the picture
quality for the built-in tuner and external input, for disc
playback, and for recording.
Setting the picture quality for TV and
external input
Picture Creation lets you choose a set of picture quality
settings for the built-in TV tuner
input. There are several preset settings that suit various
sources, or you can create up to three of your own sets.
Choosing a preset
HOME
MENU
1 With the recorder stopped, press to display
SETUP
the Home Menu.
ENTER
2 Select 'Video Adjust'.
ENTER
3 Select a preset.
Detailed Settings
• Use the INPUT button (LCD page 2) to switch between
the built-in TV tuner and the external input.
• Use the CH +/– buttons (LCD page 2) to change the
channel of the built-in TV tuner.
There are six presets available:
• Tuner – suitable for general TV broadcasts
• VCR – suitable for video cassettes
• DTV/LDP – suitable for digital broadcasts and
Laserdiscs
• Memory1 – user preset 1
• Memory2 – user preset 2
• Memory3 – user preset 3
You can press DISPLAY to see the individual settings for
the current preset (Tuner, VCR or DTV/LDP).
Note
1 When an HDMI component is not connected, the settings for the digital tuner cannot be changed.
1
and for the external
Pr 1
Tuner
Creating your own set
There are three user presets in which you can save your
own set of picture quality settings.
1 Follow Choosing a preset above and select one of
the user presets (Memory 1, 2 or 3).
ENTER
2 Select 'Detailed Settings'.
Memory1
Detailed Settings
ENTER
3 Select the setting you want to adjust.
Memory1
Prog. Motion
PureCinma
3-D Y/C
YNR
CNR
Detail
White AGC
You can adjust the following settings:
• Prog. Motion – Adjusts the motion and still picture
quality when video output is set to progressive.
• PureCinema – This setting optimizes the picture for
film material when the video output is set to
progressive. Usually set to Auto; but try switching to
Off if the picture appears unnatural.
• 3-D Y/C – Adjusts the brightness/colour separation.
• YNR – Adjusts the amount of noise reduction (NR)
applied to the Y (brightness) component.
• CNR – Adjusts the amount of noise reduction (NR)
applied to the C (colour) component.
• Detail – Adjusts how sharp edges appear.
• White AGC – Turn on for automatic white level
adjustment.
• White Level – Adjusts the intensity of white.
• Black Level – Adjusts the intensity of black.
Pr 1
Pr 1
Motion Still
Auto
Motion Still
Off Max
Off Max
Off Max
Off
14
149
En