Basic Operation; Operating The Remote Control; Using The Lcd Touch Screen - Pioneer LX01 Operating Instructions Manual

Before you start

Basic operation

This manual is split into two parts, one covering using the
receiver subwoofer, the other using the HDD/DVD
recorder. Below are some common operations and
where to find them explained in this manual.

Operating the remote control

The supplied remote control can control not only the
receiver subwoofer and HDD/DVD recorder, but also
other Pioneer products such as Blu-ray disc players, DVD
players, and Flat Screen TVs.
To operate these components, orient the remote control
toward the display unit.
Operating the receiver subwoofer
SYSTEM
• Press SYSTEM CONTROL to display the
CONTROL
SYSTEM screen.
The SYSTEM screen is shown on the remote control's
LCD screen, and the remote is switched to SYSTEM
mode.
SYSTEM
ADV.
SURR
SURR
Operating the HDD/DVD recorder
HDMI 1
DVR
• Press DVR (HDMI 1) to display the HDD/
DVR screen.
The HDD/DVR screen is shown on the remote control's
LCD screen, and the remote is switched to HDD/DVD
recorder control mode.
HDD/DVR 1/3
HDD/ JUKE
DVD BOX
F.S.
SURR
P.LIVE
TV
Choosing and operating a source component
HDMI 1 HDMI 2 HDMI 3
•
DVR BD DVD
TV
Press to cycle through connected components.
The selected component changes, and the LCD screen
on the remote control changes to that of the appropriate
component.
• To select input for Digital 1, Digital 2, Analog, Front
Audio In, or iPod, press the SYSTEM CONTROL
button to set the remote control to the SYSTEM mode,
then press the LINE button until the desired input
function is shown on the display unit.
Note
• To temporarily control the receiver while listening to
audio from a connected component on this unit,
press SYSTEM CONTROL. The selected input will not
change, and the remote changes to SYSTEM mode.
To return to the previous operating mode, press
SYSTEM CONTROL once more.

Using the LCD touch screen

Depending on the type of connected component you are
operating (such as an HDD/DVD recorder), there may be
multiple pages of information for the LCD touch screen.
When the component you would like to control is not
displayed, press PAGE to scroll to the page where the
component you would like to control is located.
• The LCD touch screen's illumination turns on and off
each time the LIGHT button is pressed. The
illumination automatically turns off after 30 seconds.
The LCD touch screen's display turns off after one
minute. To have the display shown once again, either
touch the LCD or press a button on the remote
control.
FM/AM
04
29
En