Pioneer LX01 Operating Instructions Manual page 75

Using the GUIDE Plus+ electronic programme guide
GUIDE Plus+ navigation
The table below shows a summary of the remote buttons
you'll use to navigate the GUIDE Plus+ system.
Key What it does
Press to set or cancel One-Button-

REC
Recording.
(LCD Page 1)
Press to display the GUIDE Plus+
GUIDE
screen (also use to exit).
Use to navigate screens (highlight an
item).
Action buttons that change
functionality depending on the Area.
(RED, GREEN,
YELLOW, BLUE)
Press to jump directly to the Menu bar.
MENU
Press to go directly to the Schedule
TIMER
area.
REC
(LCD Page 1)
Press to display extended information
INFO
for the current programme.
Press to confirm a selection or to leave
ENTER
the GUIDE Plus+ screen.
Use for numeric entry.
1 2 3
4 5 6
7 8 9
0
(LCD Page 2)
Press to select the previous/next page
 
of information (in the grid, for
example).
(LCD Page 1)
Press to select the previous/next day.
 


(LCD Page 1)
One-Button-Record
The RED Action button (Record) is visible anytime you
can highlight a programme title, including from the Grid,
after a search, or in your recommendations in the My TV
area.
The programme name, date, channel, recording start
and end times are all set automatically when you set a
timer recording using One-Button-Record.
Note
1 Recording times set using the GUIDE Plus+ system do not automatically change to reflect any changes that may occur in the programme
broadcast schedules.
If you need to, you can edit the settings at any time before
the recording is due to start (see Editing a scheduled
recording on page 79).
1 Highlight a programme title.
2 Press the RED Action button (Record).
The programme is now set for recording. When the
programme is due to start, the recorder will switch to the
correct channel and start recording
• You can also use the  REC button (LCD page 1) to
set the recording.
• You can review the shows you have set to record in
the Schedule Area (see also The Schedule Area on
page 79).
Lock/Unlock video window
When you enter the GUIDE Plus+ system, the channel
you were watching remains visible in the video window.
The date stamp above the window lets you know the
channel, date and time.
The default setting for this window is 'locked', as
indicated by a closed padlock icon above the video
window. When locked, the video window always shows
the channel you were previously watching as you move
up and down through the listings grid.
If you prefer, you can unlock the video window so that as
you highlight different channels in the listings grid, that
channel is shown in the video window.
1
.
04
75
En