Pioneer LX01 Operating Instructions Manual page 155

The Initial Setup menu
Setting Options
AV2/L1 In Video •
S-Video
RGB
Decoder
NTSC on PAL TV On •
Off
Many recent PAL TVs are compatible with NTSC input and so this setting can be switched off. Check the operating instructions that came with
your TV. See also About NTSC on PAL TV on page 161 for related information.
Audio In
NICAM Select NICAM •
Regular Audio
Analog Tuner Level Normal •
Compression
External Audio Stereo •
Bilingual
When the external audio is from the DV input, an audio subcode channel within the DV audio tells the recorder whether the audio is stereo or
bilingual. This has priority over the setting you make here.
Bilingual Recording A/L •
B/R
When recording bilingual audio to DVD in VR mode (except in LPCM mode), or to HDD with HDD Recording Format set to Video Mode Off (except
in LPCM mode), both audio channels are recorded and you can switch to the one you want on playback.
DV Input Stereo 1 •
Stereo 2
Mix
Audio Out
Dolby Digital Out Dolby Digital •
Dolby Digital 
PCM
DTS Out On •
Off
Explanation
Sets the AV2 (INPUT 1/DECODER) SCART input to standard composite
video.
Sets the AV2 (INPUT 1/DECODER) SCART input to S-Video.
Sets the AV2 (INPUT 1/DECODER) SCART input to RGB.
Use this setting if you connected a decoder to the AV2 (INPUT 1/DECODER)
SCART connector. For scrambled channels, make sure that the channel
Decoder setting is set to On. (See Manual CH Setting on page 154.)
NTSC discs will play correctly on PAL-only TVs.
Use if your TV is already NTSC-compatible.
Record the NICAM audio in a NICAM broadcast.
Record the non-NICAM audio in a NICAM broadcast. (You can still switch the
audio to record using the
Standard setting.
Use if the audio level from the built-in tuner is excessive, causing distortion.
Select if the audio from the currently selected external input is standard
stereo.
Select if each channel carries a separate soundtrack.
Record the left (A) channel of a bilingual source when recording to HDD
with HDD Recording Format set to Video Mode On, to DVD-R/-RW (Video
mode) or DVD+R/+RW or in LPCM mode, from an external source.
As above, but for right (B) channel recording.
Select to use the 'live' audio track (recorded during the video shoot) from a
camcorder that supports two stereo audio tracks.
Select to use the overdubbed audio track from a camcorder that supports
two stereo audio tracks.
Select one of the three settings to use a mix of the two stereo audio tracks.
Output a Dolby Digital signal when a Dolby Digital source is being played.
Convert Dolby Digital sources to Linear PCM output. Use if your connected
equipment doesn't have a Dolby Digital decoder.
Output a DTS signal when a DTS source is being played.
Switch off the digital output when a DTS source is being played. Use when
your connected equipment doesn't have a DTS decoder. In this case, use the
analog audio outputs.
button (LCD page 3) before recording.)
15
155
En