Selecting Other Languages For Language Options; Using Software Update (Digital Tuner) - Pioneer RCS-LX60D Operation Instructions Manual

Selecting other languages for
language options
k 145 ページ ２００７年４月２４日 火曜日 午後７時５８分
ENTER
1 Select 'Other' from the language list.
This option appears in the settings for DVD Menu
Language, Audio Language, and Subtitle Language.
ENTER
2 Select the language you want.
Initial Setup
Options Explanation
Basic
Recorder 1–3 Digital Tuner If you are using more than one recorder in the same room, set them to
Analogue Tuner
(default: Recorder 1) different IDs. This setting sets the recorder ID; to change the remote
Video In/Out
４日 火曜日 午後７時５８分
controller ID, press and hold RETURN/EXIT then press 1 , 2 or 3 to set. The
Audio In
Audio Out
Language
remote will only control a recorder with the same ID.
Language
Recording
This Recorder Only • Signals received through the AV input when the recorder is in standby are
not passed through to the AV output.
• Select by language name: Use the /
Pass Through Signals received when in standby are passed though to the output for
change the language.
connected devices. (Note that during EPG data download, the EPG data is
• Select by code number: Press
not passed through.)
buttons to enter the four-digit language code.
ugh , make sure to set Power Save (page 137) to Off .
See Language code list on page 158 for a list of available
Registration Code Use to display the recorder's DivX registration code. See DivX video
languages and corresponding codes.
compatibility and DivX® VOD content on page 46.
anation
Quick Preview • When in the Disc Navigator, the thumbnail video plays short excerpts from
matic chapter marking is switched off.
throughout the selected title. (Note that edited titles that will play normally
from the beginning.)
n recording in Video mode, chapter markers are inserted every 10
utes.
Normal The thumbnail video plays from the beginning of the title.
pter markers are inserted every 15 minutes.
Next Screen This option displays a menu of CI card functions. Consult your service
provider for more information on the functions available.
eo mode DVD-R/-RW discs.
Next Screen
The Software Update function can check for and download updated system
matic chapter marking is switched off.
software for the digital tuner. See Using Software Update (Digital tuner) on
n recording in DVD+R/+RW or in real-time copying, chapter markers are
page 147.
ted every 10 minutes.
pter markers are inserted every 15 minutes.
Restart USB Device If the connected USB device does not respond to the recorder, try using this
ordings made to the HDD are made in VR mode. Use this setting if you
option to restart it. If the device still does not work properly try switching it off
t need to transfer the recording later to a DVD-R/-RW (Video mode) or
then back on, and/or disconnecting then reconnecting the USB cable.
+R/+RW.
Confirm Printer
Use this option to confirm the make and model of the printer connected to
ordings made to the HDD are compatible with Video mode recordings.
the recorder (does not work with all printers).
a Dolby Digital source is being played.
setting is convenient if you want to transfer the recording to a DVD-R/
TV's Tuner Allows you to use the Pause Live TV feature with an AV Link-compatible TV
(Video mode) or DVD+R/+RW as high-speed copy can be used.
near PCM output. Use if your connected
connected by SCART cable.
gital decoder.
hannel you want to record when recording a bilingual broadcast. On the Video Mode
Recorder's Tuner • Allows you to use Pause Live TV with this recorder's internal TV tuner.
ch between them on playback. See also Bilingual Recording on page 140.
urce is being played.
ge HDD Recording Format.
DTS source is being played. Use when
on page 84 for more information on this setting.
have a DTS decoder. In this case, use the
ct if you have a standard 4:3 TV and prefer the letter box format
Proceed Puts the HDD to sleep. Using this feature when playing DVDs or CDs allows
entation for widescreen material. you to reduce noise produced by the unit, resulting in improved sound
s to 48 kHz output. Use if your connected
quality. When you wake the HDD back up it will take a few seconds to load.
ct if you have a standard 4:3 TV and prefer the pan and scan
sampling rate.
The HDD can be taken out of Sleep Mode by any number of actions,
entation for widescreen material.
Downloaded From TheatreSystem-Manual.com Manuals
including:
96 kHz source is being played.
ct if you have a widescreen 16:9 TV. Your TV settings determine how 4:3 • Turning the power off and on again.
n a source using MPEG audio is being
erial will look.
• Pressing the HDD/DVD button and choosing the HDD.
OSD DVD Menu Language
Audio Language
Language English
Subtitle Language
0 1 4
Number 5
Auto Language
DVD Menu Language
DVD Menu Language
Subtitle Display
buttons to
then use the number

Using Software Update (Digital tuner)

The Software Update function can keep the built-in
digital tuner up to date with the latest system software.
You can either check for updates manually, or have the
recorder do it automatically at regular intervals.
Access the Software Update screen from the Options
menu.
There are three options available: Manual Update, Auto
Update and Technical Information.
Manual Update
Select Manual Update to check for updated software
immediately. If new software is found then it is
automatically downloaded and installed. The new
software will take effect the next time the recorder is
powered on.
If for some reason the new software could not be
downloaded successfully, a dialog box informs you of the
error. Press HOME MENU to exit or RETURN/EXIT to
return to the previous screen.
Note that channel information may be erased when
software update is used, and that timer recording will not
work during the update.
To cancel manual update before it has completed, press
HOME MENU.
Auto Update
By default, the Auto Update option is On, which means
that periodically the recorder will check for and update
the digital tuner software if it's available. We recommend
that you leave this option On.
If new software is found and successfully downloaded,
the recorder automatically scans for new digital
channels, informing you if any are found (this is the
equivalent of using the Add New Channel option, found
in the Digital Tuner section of the Initial Setup menu).
Technical Information
This displays the current hardware and software version
numbers of the digital tuner.
En