Output Terminal Panel Familiarization - MULTIQUIP WHISPERWATT DCA800SSK2 Operation And Parts Manual

OUTPUT TERMINAL PANEL
The Output Terminal Panel (Figure 6) shown below is
located on the righthand side (left from control panel) of
the generator. Lift up on the cover to gain access to
receptacles and terminal lugs.
NOTICE
Terminal legs "O" and "Ground" are considered bonded
grounds.
PAGE 22 — DCA800SSK2 60 HZ GENERATOR • OPERATION AND PARTS MANUAL — REV. #0 (09/03/09)

OUTPUT TERMINAL PANEL FAMILIARIZATION

OUTPUT TERMINAL FAMILIARIZATION
The "Output Terminal Panel " (Figure 6) is provided with
the following:

Three (3) 120/240V output receptacles @ 50 amp

Three (3) Circuit Breakers @ 50 amps

Eight (8) Output Terminal Lugs ( U, V, W, O, Ground)
Figure 6. Output Terminal Panel