Generator Outputs - MULTIQUIP WHISPERWATT DCA800SSK2 Operation And Parts Manual

Whisperwatt series 60hz generator (std.) (komatsu saa6d170e-3 diesel engine)

Table of Contents

GENERATOR OUTPUT VOLTAGES

A wide range of voltages are available to supply voltage

for many different applications. Voltages are selected by

applying jumpers (6) to the voltage changeover board

(Figure 11). To obtain some of the voltages as listed in

Table 7 (see below) will require a ﬁ ne adjustment using

the voltage regulator (VR) control knob located on the

control panel.

Voltage ChangeOver Board

The voltage changeover board (Figure 11) is located on

the control box, behind the generator control panel. This

board has been provided for ease of voltage selection.

Figure 11.

Voltage ChangeOver Board

CAUTION

NEVER attempt to place jumper plates on the voltage

changeover board while the generator is in operation.

There exist the possibility of electrocution, electrical

shock or burn, which can cause severe bodily harm

or even death!

Table 7.

Voltages Available

Three Phase

208V

220V

(Switchable)

Single Phase

120V

1127V

(Switchable)

DCA800SSK2 60 HZ GENERATOR • OPERATION AND PARTS MANUAL — REV. #0 (09/03/09) — PAGE 25

240V

416V

440V

480V

139V

240V

254V

277V