Westinghouse WFE912SA User Manual page 23

USING YOUR OVEN
SETTING THE COOKING DURATION
1. C heck the clock displays the correct time of day.
2. S elect the desired oven function and temperature.
The oven indicator light will glow and the heating
source will come on.
3. P ress "mode" until the "cook time" indicator I
begins flashing.
4. S et the cooking duration you want by using – or +.
5 seconds after the last change, the "cook time"
indicator I will stop flashing, and the time of day will
be displayed.
NOTE: Do not forget to add preheating time if necessary.
SETTING THE COOKING END TIME
1. C heck the clock displays the correct time of day.
2. S elect the desired oven function and temperature.
The oven indicator light will glow and the heating
source will come on.
3. P ress "mode" until the "end time" indicator I
begins flashing.
4. E nter the time of day you want to finish cooking
by pressing – or +. 5 seconds after the last change,
the "end time" indicator I will stop flashing and the
current time of day will be displayed.
SETTING THE DELAYED START COOKING TIME
1. P rogram the "cook time" and "end time" as described
in the relevant sections. Once both the "cook time"
and "end time" have been set, the "cook time" and
"end time" indicators will stop flashing and the current
time of day will be displayed.
TO CHECK OR CANCEL SETTINGS
1. T o check your settings, press "mode" until the setting
you want is displayed. A red light will flash next to the
mode (cook time, end time etc) that is currently on
display.
2. T o cancel "delayed start" press "mode" until a light
flashes next to "cook time". Press and hold "–" until
the clock no longer reverses ("0:00" and you will hear
a beep). If you have left the temperature and function
knobs at a setting the oven will start once the "end
time" light stops flashing.
3. T o cancel "auto off" press "mode" until a light flashes
next to "cook time". Press and hold "–" until the clock
no longer reverses ("0:00" and you will hear a beep).
This automatically cancels "delayed start". If you
have left the temperature and function knobs at a
setting, the oven will start once the "cook time" light
stops flashing. Because you have cancelled "auto off"
the oven will continue to heat until you manually turn
it off.
ON COMPLETION OF COOKING
The oven will turn off, the timer will beep and the "end
time" and/or "cook time" indicators will flash.
1. T urn the function and temperature controls to the off
position.
2. P ress "+" or "–" or "mode" to stop the timer from
beeping.
SWITCHING THE CLOCK DISPLAY ON AND OFF
1. P ress together "+" and "–" for 2 seconds to switch
'off' the display.
2. P ress together "+" and "–" for 2 seconds to switch the
clock display 'on' again.
NOTE: If a timer mode is set, then it is not possible to
switch the display off.
USAGE
23