BEFORE OPERATING YOUR APPLIANCE
FOR THE FIRST TIME
TIPS & INFORMATION
SETTING THE TIME
If you have purchased a model fitted with an electronic or
programmable timer, you MUST set the time of day before
you can operate your appliance.
PUSH BUTTON AND TOUCH CONTROL ELECTRONIC CLOCK
MODELS WFE912 & WFE914
• A fter the appliance has been electrically connected
"12.00" will be displayed and the "clock" indicator
will flash.
• T o set the time of day, press – or +. 5 seconds after
the last change, the "clock" indicator will disappear,
confirming the time has been set.
NOTE: The clock has a 24-hour display.
MODEL WFE912
MODEL WFE914
OPERATION
10
PROGRAMMABLE CONTROLLER: MODELS WFE916, WFE946 & WVE916
• A fter the appliance has been electrically connected,
the set clock symbol
will flash on the clock display.
• T o set the time of day, press – or +. 5 seconds after
the last change the timer arrow will disappear,
confirming the time has been set. Once the time has
been entered, the clock advances minute by minute.
NOTE: The clock has a 24-hour display.
PREPARING YOUR APPLIANCE FOR THE FIRST TIME
• P lease remove all internal boxes and bags from the
oven before operation.
• P lease wipe out the oven interior prior to operation
with warm soapy water and polish dry with a soft
clean cloth. Do not close the oven door until the
oven is completely dry.
• N ew appliances can have an odour during first
operation. It is recommended to 'run in' your oven
before you cook for the first time. Run the oven at
180ºC for 2-4 hours and ensure that the room is
well ventilated.
• D O NOT line the oven with foil, it will damage
the enamel.