Westinghouse WFE912SA User Manual page 17

USING YOUR CERAMIC COOKTOP
The length of time that the automatic warm up function
operates depends on the heat setting selected.
HEAT SETTING
AUTOMATIC WARM UP (MIN:SEC)
0.30
1.00
1.40
4.50
6.30
10.10
2.00
3.30
4.30
– – –
USING THE CHILD SAFETY DEVICE
The child safety device prevents unintentional use of the
appliance.
SWITCHING ON THE CHILD SAFETY DEVICE
STEP CONTROL PANEL
1.
Switch the appliance on
(Do not set a heat setting)
2.
Touch for 4 seconds
The child safety device is switched on
SWITCHING OFF THE CHILD SAFETY DEVICE
STEP CONTROL PANEL
1.
Switch the appliance on
(Do not set a heat setting)
2.
Touch for 4 seconds
3.
Switch the appliance off
The child safety device is switched off
The child safety device can only be switched on or off, if no
heat setting is set.
OVERRIDING THE CHILD SAFETY DEVICE
The child safety device can be switched off in this way for a
single cooking session; it remains activated afterwards.
STEP
1.
2.
Until the appliance is next switched off, it can be used as
normal. After switching off the appliance, the child safety
device is active again
After overriding the child safety device, a heat setting or a
function must be set within approx. 10 seconds, otherwise
the appliance automatically switches itself off.
DISPLAY
DISPLAY
lights up
CONTROL PANEL
Switch the appliance on
Touch for 4 seconds
TIPS & INFORMATION
DISPLAY
lights up
OPERATION
17