Westinghouse WFE912SA User Manual page 38

INSTALLATION OF THE APPLIANCE
INSTALLATION OF ANTI-TILT BRACKETS AND HOOK
• T h e anti-tilt brackets must be secured to the floor at
rear of cavity with an appropriate fastener according
to dimensions in diagram
• T he hook is to be secured to the back wall in the
location shown above with an appropriate fastener
capable of withstanding a 10kg load
• C onnect services to the appliance prior to placing
into cavity
• T o locate appliance, slide into cavity and ensuring
the rear left and right foot of appliance are captured
by the anti-tilt brackets
• B efore the appliance is fully pushed into position,
place the chain attached to the rear of appliance
onto the wall hook
INSTALLATION
38
Hole location for
hook installation
C
L
425
425
194
194
376 376
FLOOR MOUNTED INSTALLATION (continued)
Measurements are to be adjusted to account for the thickness of any skirting
Measurements are to be adjusted to account for
board or tiles coming between the back of the appliance and the wall.
the thickness of any skirting board or tiles coming
between the back of the appliance and the wall
Hook
Appliance
Chain installed
Wall