INSTALLATION OF THE APPLIANCE
SLOT-IN INSTALLATION
SLOT IN CONVERSION
To convert the appliance for slot in installation the kick panel
provided on the appliance is removed and the appliance is
mounted on a plinth. This enables a continuous cupboard
kick board to be installed, giving a more integrated
appearance. There is no clearance requirement between
oven and adjacent side cabinets.
6 0 0 m m m in im u
600mm minimum
v e rt ic a l c le a ra
vertical clearance
fr o m c o m b
from combustible
u s ti b le
s u r fa c e s
surfaces
8 9 5
m m
TO REMOVE THE APPLIANCE KICK PANEL
• R emove all loose parts ie. Burner crowns & caps,
trivets, oven shelves
• C arefully lay down the appliance onto one side onto
foam packaging and remove the screws as shown
from each corner bracket
Once the kick panel is removed, fit removed screws
•
back onto the appliance in the same locations.
m
n c e
900 mm min imu m
6 0 0 m m
600mm
900mm minimum
T h i s s
u r f a c e
w i t h t
i s t o b
h e t o
e l e v e
p e d g
e o f t
h e k i c
This surface is to be level with
the top edge of the kickboard
Remove 4 screws on
each corner bracket
Remove 4 screws on
each corner bracket
l
k b o a r
d
39
INSTALLATION