Table of Contents
Advertisement
BEFORE OPERATING YOUR APPLIANCE FOR THE FIRST TIME
TIPS & INFORMATION
IMPORTANT
Setting the time
If you have purchased a model fitted with an electronic
or programmable timer, you MUST set the time of day
before you can operate your appliance.
After electrically connecting the appliance, you must set
the time of the day before you can operate your oven.
Push button timer model WFE912
•
After the appliance has been electrically connected
'12:00' will be displayed and the clock ~'indicator'
will flash.
•
To set the time of day in hours and minutes press
the - or + buttons.
5 seconds after the last change, clock ~'indicator' will
disappear, confirming the time has been set. Once
the time has been entered, the elect. advances minute
by minute.
NOTE: The clock has a 24-hour display.
Touch control electronic clock model WFE914
•
After the appliance has been electrically connected
"12.00" will be displayed and the "clock" indicator
will flash.
•
To set the time of day, press - or +. 5 seconds after
the last change, the "clock" indicator will disappear,
confirming the time has been set.
NOTE: The clock has a 24-hour display.
6
BEFORE OPERATION
Preparing your appliance for the first time
•
Please remove all internal boxes and bags from the
oven before operation.
•
Please wipe out the oven interior prior to operation
with warm soapy water and polish dry with a soft
clean cloth. Do not close the oven door until the
oven is completely dry.
•
New appliances can have an odour during first
operation. It is recommended to 'run in' your oven
before you cook for the first time. Run the oven
at 180°C for 2 hours and ensure that the room is
well ventilated.
•
DO NOT line the oven with foil, it will damage
the enamel.
Advertisement
Table of Contents
