DigiDesign Digi 002 Getting Started Manual page 92

Play the instrument or sound source at the
5
volume you will record.
Adjust the input gain for the channel using
6
the gain knob (located on the top panel of the
Digi 002, and on the front panel of the
Digi 002 Rack). Increase or decrease gain until
you are able to achieve maximum peak levels in
the Auxiliary Input track meter without clip-
ping. Typically such peak levels are in the yellow
area of the meter.
Mic/Line High-Pass Filters
Mic/Line Inputs 1–4 include a high-pass filter
set at 75 Hz. This filter can be useful for filtering
out low-end rumble from a noisy recording en-
vironment, microphone handling, or AC noise.
High Pass Filter switches
1 GAIN 2 GAIN
High Pass Filter switches (front panel)
Recording an Audio Track
To record an audio track:
Assign the input for a track and set its input
1
levels.
Click the Track Record Enable button.
2
Record enabling a track in the Mix window
84 Digi 002 & Digi 002 Rack Getting Started Guide
LINE/ INST
MIC
3 GAIN 4 GAIN
Choose Window > Transport to display the
3
Transport window.
Return to Zero
Rewind
Online
Stop
Transport window (Expanded view shown)
Click Return To Zero to start recording from
4
the beginning of the session. You can also record
according to a selection or from the cursor loca-
tion in the Edit window.
Click Record in the Transport window to en-
5
able recording.
Click Play or press the Spacebar to record on
6
all record-enabled tracks.
Record your performance.
7
Click Stop in the Transport window or press
8
the Spacebar when you are finished recording.
To play back a recorded track:
Click the track's Record Enable button a sec-
1
ond time to take it out of Record mode.
Click Play in the Transport window or press
2
the Spacebar to start playback.
Click Stop in the Transport window or press
3
the Spacebar to stop playback.
Fast Forward
Play Go to End
Record Enable