DigiDesign Digi 002 Getting Started Manual page 116

Press F2 (Naming). The Channel Select
2
switches flash on channels 2–8 and a cursor ap-
pears beneath the first character in the Scribble
Strip of channel 1. The Channel Select switch
below channel 1 lights solid to indicate that its
name is being edited.
Turn the Rotary Encoder for the first channel
3
to select the first character. (Available characters
include uppercase and lowercase letters, numer-
als, and symbols.)
Press the Left and Right Arrow keys in the
4
Navigation section of Digi 002 to move the cur-
sor left and right in the Scribble Strip display.
When you are finished naming the first chan-
5
nel, you can press the Channel Select switch or
move the Rotary Encoder for another channel to
edit its name.
When you are finished naming channels,
6
press the Escape switch or F2 again to return to
Home View.
The new channel names are retained in Stand-
alone mode as long as Digi 002 remains pow-
ered on.
To save the channel names for recall at a
later time, you can store the names as part
of a Snapshot . See "Storing Snapshots" on
page 114.
Channel View
Channel View lets you display the controls for
the internal EQ and Dynamics effects on each
channel, and also offers a way to view the all
pan and send controls on a single channel.
108 Digi 002 & Digi 002 Rack Getting Started Guide
EQ
Each Input channel offers a dedicated 3-band
EQ, accessible from EQ switch in the Channel
View area.
To display the EQ controls for a track:
In Stand-alone mode, press the EQ switch in
1
the Channel View area.
Select a channel whose EQ controls you want
2
to display by pressing its Channel Select switch.
The Display Scribble Strips show "EQ" and the
number of the selected channel.
Digi 002 displays the EQ controls across the
Channel Scribble Strips.
See "EQ Controls" on page 110 for more infor-
mation on working with EQ effects.
Dynamics
Input channels 1–4 offer a dedicated compres-
sor, accessible from the Dynamics switch in the
Channel View area.
To display the compressor controls for a track:
In Stand-alone mode, press the Dynamics
1
switch in the Channel View area.
Select from channels 1–4 the channel whose
2
Dynamics controls you want to display by press-
ing its Channel Select switch.
Digi 002 displays the compressor controls across
the Channel Scribble Strips. The Display Scrib-
ble Strips show "Dyn" and the number of the se-
lected channel.
See "Dynamics Controls" on page 111 for more
information on working with Dynamics effects.