Navigating In A Session - DigiDesign Digi 002 Getting Started Manual

Navigating in a Session

Pro Tools LE provides many ways to navigate in
a session, including using the mouse or entering
a memory location into one of the counters.
To navigate to a location in the Edit window:
In the Options menu, make sure Link Time-
1
line and Edit Selection is enabled.
Enable the Selector tool at the top of the Edit
2
window by clicking it.
Selector tool
Edit tools in Edit window
Click in a track or Timebase ruler. The cursor
3
appears at the selected location and the
counters display the current time location.
Click in a track or on a Timebase ruler
Clicking with the Selector tool in the Edit window
To navigate using the counters:
Click in the Main counter and enter a location
1
using your computer keyboard.
78 Digi 002 & Digi 002 Rack Getting Started Guide
Press Enter (Windows) or Return (Macintosh).
2
Navigating with the Counter
Press the * (asterisk) key on the numeric
keypad as an alternative to clicking in the
counter. (The cursor will always appear in
the Transport window's Main Counter if it
is displayed.)
Memory Locations
Memory Locations and markers provide another
way to navigate within sessions. Memory Loca-
tions appear as markers under the Timebase rul-
ers. You can store up to 999 Memory Location s
or markers in a session.
To define a memory location:
Navigate to the location where you want to
1
store a marker or memory location.
– or –
Begin playback somewhere before the point
where you want to store a Memory Location or
marker.
Create a memory location by doing one of the
2
following:
• Press Enter on the numeric keypad.
– or –
• Click the Add Marker/Memory Location
("+") button, located to the left of the
Markers ruler.
On some Windows laptops, you can press
Fn+Enter to create a memory location. This
is especially useful for laptops that do not
have a numeric keypad.