Transport Controls - DigiDesign Digi 002 Getting Started Manual

System Resources and Settings
You can change specific Pro Tools system set-
tings to optimize system performance.
Playback Engine Dialog
The Playback Engine dialog lets you adjust sys-
tem buffer sizes and allocate CPU processing
power in Pro Tools.
Playback Engine dialog for Pro Tools LE system
To configure system resources:
Choose Setup > Playback Engine.
See Chapter 4, "Launching and Configuring
Pro Tools LE"for details on configuring system
settings.
System Usage Window
The System Usage window displays approxi-
mate information on CPU load and overall disk
performance, so you can gauge your system's
processing capacity.
Meters in the System Usage window
To view system resources and usage:
Choose Window > System Usage.

Transport Controls

The Transport window provides access to all
Pro Tools LE transport commands. Different
transport controls can be displayed or hidden in
this window.
To show the Transport window:
Choose Window > Transport.
Return to Zero
Rewind
Online
Stop
Transport window (Expanded view shown)
To configure the Transport window:
Choose View > Transport and select from the
available view options.
The Transport window provides Play, Stop, and
other standard transport controls.
The Expanded view of the Transport window
provides pre- and post-roll, start, end, and
length indicators for Timeline selection, as well
as the Transport Master selector.
Chapter 9: Working with Pro Tools LE
Fast Forward
Play Go to End
Record Enable
73