Midi Connections - DigiDesign Digi 002 Getting Started Manual

MIDI Connections

Using the Digi 002 or Digi 002 Rack built-in
MIDI ports, a MIDI keyboard controller and
MIDI instruments, you can take full advantage
of the MIDI features of Pro Tools LE. These in-
clude recording and editing MIDI tracks, syn-
chronizing to MIDI Time Code or MIDI Beat
Clock (this requires an appropriate MIDI inter-
face) and using a MIDI control surface.
See the Digi 002 and Digi 002 Rack Basics
Guide for information on basic MIDI con-
cepts.
MIDI ports are only active when Pro Tools
is launched.
See Appendix A, "Configuring MIDI Studio
Setup (Windows Only)"or Appendix B,
"Configuring AMS (Mac OS X Only)" for
detailed information on how to identify ex-
ternal MIDI devices connected to your MIDI
interface and configure your MIDI studio
for use with Pro Tools.
To connect MIDI devices to Digi 002 or
Digi 002 Rack:
Using standard 5-pin MIDI cables, connect
1
the MIDI Out port of the MIDI device or con-
troller to the MIDI In port of your Digi 002 or
Digi 002 Rack.
Connect the MIDI In port of your MIDI device
2
or controller to either of the two MIDI Out ports
of the Digi 002 or Digi 002 Rack.
L
MAIN L/1 MON OUTPUT L
R
ALT SRC
MAIN R/2 MON OUTPUT R INPUT
964530300294856
SERIAL NUMBER
MIDI OUT 2 MIDI OUT 1 MIDI IN
MIDI In and Out ports (back panel)
Connect the audio outputs of your device to
3
available audio inputs of the Digi 002 or
Digi 002 Rack.
Chapter 8: Connecting Your Studio
MIDI Out ports
MIDI In port
65