Powering On The Digi 002 Or Digi 002 Rack; Removing Pro Tools Le - DigiDesign Digi 002 Getting Started Manual

4-Pin FireWire Cable
Digi 002 and Digi 002 Rack include a 6-pin to
6-pin FireWire cable. Some Windows laptops in-
clude a 4-pin FireWire port. To use Digi 002 or
Digi 002 Rack with these computers, a 4-pin to
6-pin cable is required. Purchase this cable
(model #CS625) through your authorized Digi-
design dealer or online through the DigiStore
(www.digidesign.com).
This cable can also be purchased at com-
puter supply stores. Maximum supported
cable length for FireWire (IEEE-1394) is
14 feet (4.3 meters).
Connecting Other FireWire Devices to
Digi 002 or Digi 002 Rack
The second FireWire port on the Digi 002 or
Digi 002 Rack unit is available for daisy-chain-
ing FireWire devices such as digital cameras or
digital video recorders. Even when it is powered
off, Digi 002 or Digi 002 Rack supplies power
from the computer through its FireWire ports,
letting you recharge batteries in connected
FireWire devices.
Powering On the Digi 002 or
Digi 002 Rack
After you have made all cable connections, you
are ready to power on the Digi 002 or Digi 002
Rack.
To power on the Digi 002 or Digi 002 Rack:
Toggle the power switch on the back panel
(Digi 002), or press the power switch on the
front panel (Digi 002 Rack). After a short
power-up sequence the Sample Rate LED and
Monitor Mute switch illuminate to indicate the
unit is on.
22 Digi 002 & Digi 002 Rack Getting Started Guide
Do not disconnect the FireWire connection
to the Digi 002 or Digi 002 Rack while the
unit is powered on. Connecting and discon-
necting the FireWire cable after the unit is
powered up can cause errors and may dam-
age the unit.
Be sure to power down all components of
the system before disconnecting them.

Removing Pro Tools LE

If you need to remove Pro Tools LE software
from your computer, you can use the Installer
CD or the downloaded Installer file.
To remove Pro Tools from your computer:
Make sure you are logged in as an Administra-
1
tor for the account where Pro Tools is installed.
(For more information, refer to your Mac OS X
documentation.)
Insert the Pro Tools Installer CD-ROM in your
2
CD-ROM drive or locate the downloaded In-
staller file.
Double-click "Install Pro Tools LE."
3
Enter your Administrator password and click
4
OK.
In the Installer window, choose Uninstall
5
from the pop-up menu, and click Uninstall.
Follow the on-screen instructions to remove
6
Pro Tools LE.
When finished, click Quit to close the Installer
7
window.